Often you need more power can provide a digital output from the Arduino boards.  Then you can use the ：Ledong N-channel MOSFET Shield.

Possible applications:
Vibration motors
Superbright LEDs
Peltier elements
Bulbs

Outputs: Outputs:
3x MOS-FET transistor N

Inputs: Inputs:
3x analog or digital input used

Technical data:
5-12 V via Arduino
1.5 V – 12 V via external power supply
1 Amp total on Vin by Arduino

Extras:
Jumper for 5V or Vin
Connection logic voltage output (5V and GND)
LED display for output
Power connection

Dateien: Files:

Bestückungsplan: Layout:

R1: 220 Ohm R1: 220 Ohm
R2: 220 Ohm R2: 220 Ohm
R3: 220 Ohm R3: 220 ohms
R7: 1 kOhm R7: 1 kOhm
R8: 1 kOhm R8: 1 kOhm
R9: 1 kOhm R9: 1 kOhm
R10: 100 kOhm R10: 100 ohms
R11: 100 kOhm R11: 100 ohms
R12: 100 kOhm R12: 100 ohms
R14: 100 Ohm R14: 100 Ohm

Pots (R4-R6): 100kOhm (Type: PT6KV)
FET1 – FET3: IRF 640 N (Type: TO 220)

1x 32-pin socket connector height 4.2 mm, close contacts
1x pin header 90 degree 3 pins for servo connection
1x 3-pin male connector for Spannungsselektor
1x Jumper
4 x 2-pin terminal RM 3.5
PC terminal block 2x 3pin RM 3.5

Pinheader  :
2x SSW-106-04-FS
2x SSW-108-04-FS

Coming soon http://imtcn.com/SHOP as Kit.